As an expert in the culinary arts, I am excited to share my knowledge on how to perfectly cook a tomahawk steak on a gas grill. Tomahawk steak is a delicious and impressive cut of meat that requires a bit of finesse to cook to perfection.
One must consider the thickness of the steak, the temperature of the grill, and the seasoning to achieve a mouth-watering result. In this guide, I will share the step-by-step process to cook a juicy, flavorful tomahawk steak on a gas grill.
From choosing the right cut of meat to the final touches of seasoning, you’ll have all the information needed to impress your guests with your grilling skills.
What is Tomahawk steak?
Tomahawk steak is a cut of beef from the plate section of the animal. It is cut from the rib area and includes the rib bone, which makes for a large piece of meat, about two pounds. The bone can be removed by your butcher or at home with a sharp knife. Tomahawk steak was developed by American chefs to give customers a showy dish that looks impressive but isn’t too expensive.
What is a gas grill?
Gas grills are a type of grill that uses gas to heat the cooking surface. A gas grill is usually made up of several parts: a burner, which heats the cooking surface; a propane tank, which provides fuel for the burner; and a control panel, which allows you to turn on the heat and adjust it at different levels.
How to Cook Tomahawk Steak on a Gas Grill?
Whether you’re new to cooking with gas grills or a seasoned pro, these helpful tips will ensure that your next dinner party is nothing short of perfection.
To get the most out of your meat, it’s important to season properly. We’re an advocate for keeping things simple – all you should aim for is just to draw out exquisite flavor with a few spices on top!
We recommend a spice blend of black pepper, kosher salt and possibly garlic powder. However, if you prefer not to use any steak seasonings then go ahead with your preferred spices instead! Because this dish consists mostly out large pieces (tomahawk) of meat it is very important that they are seasoned well throughout so make sure all sides get coated in flavor from top-to bottom including fatty sections as well
To make the most out of your steak, we recommend using a spice blend that includes black pepper along with some garlic powder or another favorite seasoning. Tomahawk steaks are large cuts so be sure to coat them well and get every inch covered in delicious flavors!
Let your steak rest after seasoned well. Allow the meat to sit for at least 45 minutes before cutting or else it will be tough. You can also refrigerate seasoned beef if you want so that’s an extra step but not necessary!
The steak soaks up all the flavors and tastes great while it’s soaking. In addition, during this time you can see that some moisture has been absorbed by your meat which will aid in creating a beautiful crust later when we sear them off!
When grilling a typical steak, you may well be able to do without using the thermometer. Usually when steaks are thinner and cook quickly, they can tell if their doneness by looking at them so long as there’s some cooking expertise involved!
The tomahawk steak is a unique cut of beef that needs special attention when cooking. While it’s tempting to just cook until medium rare, you will want the probe meat thermometer for this task so as not to ruin your dinner party!
Unlike other meats, steak should be cooked to a temperature in the range of 123-125 degrees Fahrenheit. This will give it more flavor and make for an enjoyable meal!
To get the most from your steak, make sure it reaches an internal temperature of 125°F before removing. It’s normally medium rare with just a smidgeon chance at being considered “medium.” One thing you may want to keep in mind is that even after setting aside for some time while cooking on another surface or over direct flame, they will continue cooking slightly when returned into the oven so be careful!
If you want to give your guests a true steakhouse experience, then it is important that they chew their food thoroughly. A good way of doing this is by slicing the meat into ½-inch thick pieces so each bite has plenty of flavors and textures on offer from tenderloin or ribeye!
FAQs about how to cook a Tomahawk steak on a gas grill
What temperature do you cook a Tomahawk steak on a gas grill?
Tomahawks are a type of steak that you cook on gas grills at high heat or 400 degrees Fahrenheit.
How long do you cook a Tomahawk steak on each side?
The steak should be cooked 4-5 minutes per side on a gas grill, but don’t let it overcook or become tough and dry.
What temperature should a Tomahawk steak be?
Rare steak is often cut from the tomahawk, and it needs to reach an internal temperature of 125-130 degrees Fahrenheit before cooking. It takes three minutes for each side in order to achieve this goal!
How long do you rest a Tomahawk steak?
When cooking with a tomahawk steak, it’s important that you rest the meat for at least 5-10 minutes. This will allow time for juices from fatty areas of the animal to be reabsorbed into its body before cutting so they can flow more evenly during the cooking process and make your dish come out delicious!
What temperature is medium Tomahawk steak?
Medium Tomahawk Steak is a perfect choice for those who want to enjoy the flavors of their favorite cut without sacrificing tenderness. It’s cooked at around 350 degrees Fahrenheit, meaning it will be soft and silky in your mouth with just enough chewiness from its crust on top!
Is a tomahawk steak the same as a ribeye?
The difference between a ribeye and tomahawk steak is like comparing filet mignon to T-bone. A traditional cut from the beef’s famous short loin blade, both meats have been intricately carved into their respective muscles by skilled butchers who understand how much easier it is for people just looking at numbers on paper rather than exploring different flavors with every bite they take!
What do you serve with Tomahawk steak?
The tomahawk steak is a dish that needs little to no dressing up. It’s usually served with sauce, but since it has such rich flavors, you can enjoy this juicy cut of beef just as much without any accompaniment except for your fork and knife!
How do you cook a dry-aged Tomahawk steak on the grill?
The best way to cook a dry-aged steak is on the grill. Preheat it for 6 – 8 minutes per side, or until cooked through and ready as desired; allow this meat type time so that its flavor can develop even more!
Do Tomahawk steaks taste better?
Yes. Tomahawk steaks are a popular cut from the back of certain animals, such as deer and elk. The long narrow shape makes it easier for hunters who want to cook their meat quickly without having any tough or raw pieces remaining after cleaning off all bones!
The beef from an animal’s backside is usually not as fatty because it’s used for moving cattle and does not have time to accumulate fat during the day.
When slow-cooked or braised, the tough collagen fibers in these less worked muscles break down into rich and flavorful juices that can be used as a base for sauces.
How many does a Tomahawk steak feed?
If you’re looking for an easy way to feed your guests, a tomahawk steak might be just what they need. A 4-ounce cut of meat can still provide enough food that 2 people will not go hungry and there’s always room left over if someone else wants some too!
It’s important to make sure that everyone eating gets a good portion of Tomahawk steaks. These delicious and luxurious cuts come at an affordable price, but it’s not worth your time if they’re going out with just one person!
What makes a Tomahawk steak expensive?
The tomahawk steak is a thick cut of meat that comes from the animal’s ribcage. It’s not as expensive or hard to find, but still more costly than other meats like filet mignon which come from specific parts on a cow such as flank area and round Shin bones in beef cattle.
If you want to impress your guests, this is the cut for them. Marbled with fat running through it; highly expensive but worth every penny when they taste how good these ribs are!
How do you cut Tomahawk steak after cooking?
Tomahawk Steak is a cut that comes from the rib section of an animal. The heart has long and thin pieces, which makes it tender but also cooks quickly so you need to make sure your grill or oven temperature reaches high before cooking this steak!
To ensure a delicious and juicy meal, season your steak with salt and pepper before placing it on the grill. Cook for about 4 minutes per side to get that perfect chew!
When you’re ready to cut into that steak, remove it from the grill and let sit for a few minutes before making your cuts.
How do I know when my steak is done on the grill?
- The only way to be sure your steak is cooked perfectly, and ready for consumption or donation (depending on the current heat wave), is with a meat thermometer. It should read at least 145 degrees Fahrenheit when done medium rare; 160 if you prefer it more hacked up but still pink in center and 175F if we’re talking well-doner!
- There are many ways to tell if your steak is done, but one of the most reliable techniques for medium rare or pink in flavor (and tenderness) will be when it has a slight give when pressed. If you’re looking at this cut while on an open grill with no cover chef hat-, then they should still probably not yet universally touch metal utensils because they can cause fires!
- To determine if your steak is cooked to the proper temperature, you can use one of many methods. A pink center with slightly charred crust indicates medium-rare while a light brown color and more burnt outer layer means well done!
- Let’s chat about how to make the most out of your next steak dinner. After cooking, let a medium-rare cut rest for 5 – 10 minutes before eating so that juices can redistribute and enhance flavor profile in an amazing way!
What is the best way to cook a tomahawk steak?
The tomahawk steak is a thick, tough cut of meat that can be difficult to cook evenly on the grill. To get an excellent result with this type of cooking method use medium heat and apply direct flame for 3-4 minutes per side or until your internal temperature reaches 145 degrees Fahrenheit (or 160 if you like it rarer). Don’t forget about those amazing resting times too – they’re necessary so don’t wait!
Why do you wrap the bone on a tomahawk steak?
We wrap our tomahawk steaks in bacon because we want to give you the best steak experience possible. By wrapping the steak in bacon, we can preserve the flavor of the tomahawk steak while also making it easier to cook and serve. Wrapping the steak also ensures that it will stay moist while cooking, which means you’re getting one of the most tender steaks available anywhere!
How long do you grill a 2-inch Tomahawk steak?
If you’re looking for a delicious and tender steak, then this recipe is exactly what your taste buds need! It’ll take some time to cook up those amazing steaks. Make sure not grill them too long or they may become tough as rock.
But don’t worry; with just 20–22 minutes of cooking on average per inch of thickness desired, there’s plenty of room left before they hit 130°F degrees Fahrenheit which ensures maximum juiciness when served right away after taking off from the heat source.
How to reverse sear on a gas grill?
If you’re looking for a foolproof method for cooking the perfect steak, look no further than the reverse sear. This method involves cooking the steak indirectly on the grill first, before searing it over high heat to finish. Not only does this produce a juicy, evenly cooked steak, but it also allows you to control the level of doneness more precisely. Here’s how to do it on a gas grill.
- Preheat your grill for indirect cooking. For a gas grill, this means turning on one or two burners (depending on your grill) and leaving the other(s) off. For a charcoal grill, you’ll need to build a two-zone fire by piling coals on one side of the grill and leaving the other side empty.
- Season your steak with salt and pepper, then place it on the cool side of the grill. Close the lid and cook the steak until it reaches 5-10 degrees below your desired level of doneness. For example, if you want a medium-rare steak, cook it to an internal temperature of 125-130 degrees Fahrenheit.
- Move the steak to the hot side of the grill and sear it for 1-2 minutes per side.
- Remove the steak from the grill and let it rest for 5-10 minutes before cutting into it. Enjoy!
How many tomahawk steaks are in a cow?
You can get up to 14 tomahawk steaks per cow if your butchers prepare it correctly. Some people prefer eating more beef than others, so this may depend on what you’re looking for in the meat!
What do you serve with Tomahawk steak?
Some people might say that you don’t need anything else with a Tomahawk steak because it is so flavorful and juicy. However, if you are looking for some sides to go with your meal, we suggest trying roasted potatoes, grilled vegetables, or a simple salad. For a more indulgent option, you could also pair your steak with creamed spinach or mashed potatoes. No matter what you choose, we are sure that you will enjoy your Tomahawk steak!
What makes a tomahawk steak special?
There are a few things that make a tomahawk steak special. First, it is a very large and thick steak, which makes it ideal for grilling or smoking. Second, the bone in the center of the steak adds extra flavor and juiciness. Finally, the long handle on the tomahawk steak makes it easy to slice and serve.
What part of the cow is a tomahawk steak?
A tomahawk steak is cut from the beef chuck eye roast, which is located between the rib and shoulder blade in the front quarter of the cow. The name “tomahawk” comes from the fact that this type of steak is usually served with the bone still attached, which resembles a small hatchet or tomahawk. This kind of steak is also sometimes referred to as a “cowboy steak”
Tomahawk steaks are usually quite large, often weighing 16 ounces or more. Because of their size and thickness, they are best suited for cooking methods that involve slow, gradual heat, such as grilling or baking. When cooked properly, tomahawk steaks are tender and juicy, with a rich, beefy flavor.
Is a cowboy steak the same as a tomahawk steak?
There’s no definitive answer to this question since there is no one standard definition for either term. A cowboy steak generally refers to a thick, bone-in ribeye steak, while a tomahawk steak is a more specific type of cut that includes the ribeye along with a long bone attached. So, while they may be similar in some respects, they’re not necessarily the same thing.
Is reverse sear better for a tomahawk steak?
Reverse sear is a great way to cook a tomahawk steak because it helps to evenly cook the meat and gives it a nice sear on the outside. This method of cooking can take a little bit longer than other methods, but it is worth it for the flavor and texture that you get from the steak.
How much does a tomahawk steak cost per pound?
With our tomahawk steaks, you can have a rib eye that is almost as long and impressive looking. We offer them at an unbeatable price of only $28 per bicolpate to competitors who charge up to 57 dollars for just 1/2 pound more in weight
Should you wrap tomahawk bone in foil?
It’s not necessary to wrap tomahawk bones in foil but doing so can help speed up the cooking process. Foil helps to conduct heat and can prevent the bone from drying out during cooking. If you’re using a gas or charcoal grill, you can wrap the bone in foil before placing it on the grate. For best results, cook the meat over indirect heat so that it doesn’t char.
Tomahawk steak is best served medium-rare to medium, so be sure to use a meat thermometer to check for doneness before removing it from the grill.
Can you slow cook a tomahawk steak?
Typically, tomahawk steaks are grilled or pan-seared. However, you could theoretically slowly cook a tomahawk steak, although it may not turn out as tender and juicy as you might like. If you do decide to slow cook a tomahawk steak, we recommend using a crockpot or slow cooker set to low heat for best results.
Conclusion
In conclusion, cooking a tomahawk steak on a gas grill may seem daunting, but with the right technique and tools, it can be easily achieved. The first step is to season the steak generously with salt and pepper and let it come to room temperature before grilling. Preheating the grill to high heat is crucial for achieving a beautiful sear on the steak.
After searing both sides, moving it to a cooler part of the grill and incorporating indirect heat will ensure that the steak is cooked to perfection without drying it out. Finally, letting the steak rest before slicing into it will allow the juices to redistribute and make for a mouth-watering and memorable meal. Happy grilling!